New ProPumps Demand Delivery Diaphragm Pumps 12VDC 110 PSI 1.8 MLN FL-3201 12V

Description

4063XXXX.2.52
New ProPumps FL Series Demand Delivery Diaphragm Pumps, Water Transfer, 12 Volts DC, 110 PSI  Pressure, 1.8/MLN, Model Number FL-3201 or FL3201.  Each bid quantity is for One (1) Pump.  You may bid / buy any number, up to the total quantity available above.
These were purchased at an industrial liquidation earlier this year, and they were brand new in the original bulk factory cases.  Really nice pumps, with fully enclosed steel motor housing, and weighing in at 2.52 pounds each.  Should be good for all kinds of agricultural spraying and RV water needs.  They are marked, "1.8/MLN" but that doesn't ring a bell, so maybe it is supposed to be 1.8L/MN (1.8 Liters/Minute)? We really don't know if that would be at rated pressure or open flow or what.
Note
: These pumps have O-ring quick-connect nipples which require two (2) mating connector fittings (not included). If you know what they are called, you can probably locate some online. Or, you can just slip hoses over the nipples and secure them with hose clamps.
According to the calipers
:
Overall length:  7-1/8 Inches
Overall width:  4-1/16 Inches
Mounted height:  3-1/4 Inches
Mounting holes:  (approx.) 3/18" diameter, spaced 3-1/8" x 2-1/4" OC (on centers)
Nipple outside diameter (at end):  .424"
Nipple outside diameter (beside retainer groove):  .484"
Retainer groove diameter:  .375"
Nipple inside diameter:  .225"