For-Xiaomi M365 Electric Scooter Locking Ring Screw Spare For Folding Mechanism

Description

Product Description
For-Xiaomi M365 Electric Scooter Locking Ring Screw Spare For Folding Mechanism
Warning: It is illegal to ride electric scooters on public roads, pavements, or cycle paths. They are intended only for use on private land with the owner's permission.
Description:
Shaft Locking Buckle Assembly Set Spare Pats For Xiaomi M365 Electric Scooter
Item Specifics:
*Material:Alloy steel, Stainless steel
*Compatible with:Xiaomi M365 Electric Scooter
Features:
*Replacement or upgrading parts for Xiaomi M365 shaft locking.
*Machined with high precision for perfect fitness.
*Controlled opening easy closing, two-stepper closing possible, flexibility of setting, Maximum reduction of mechanical play.
Instructions:
* Unscrew the old lock, keep the screw safe as you are going to use the same one for the replacement part.
To punch out the pin you need to make sure you do it from the correct side. Make sure you do it from LEFT to RIGHT (when looking from the front of the scooter, not from the steering wheel side). Lay down the scooter, put something solid under the folding mechanism. Make sure to watch out for cables! Move them away before each punch otherwise you are going to break them.
* Apply some lubricant, oil or WD40 to the pin and leave it for a while. Some customers prefer to use hot air tool instead to slightly heat the pin.
* Apply 4mm punch tool and hit it hard multiple times. Once again, watch out for cables. This process can be quite difficult, we personally spent 15 minutes to punch it out while others manage to do it within minutes.
* Take a new lock and use the same screw to put it back on.Turn the scooter upside down as the pin has to be inserted from the other side (RIGHT TO LEFT when looking from the front of the scooter)
* Make sure to follow the arrow on the pin. Put the pin inside and then apply the punch tool once again. It should go in quite easily. Punch it until its aligned from both sides.
* Readjust your shaft lock/bolt to make sure the new lock folds in well. Do not over tighten it, but do not make it too loose either (just enough resistance in it and there is no play in the stem/hinge).
* Please note: instead of punching the whole pin out some community members prefer to just cut the metal pin from both sides of the lock and then punch out the remaining bits. You could also try using vice and a bolt if punching out the pin does not work for you.
* Returns are not accepted for used items when you are not able to replace the lock. Only for items in a same condition and packaging.
Package Included:
1 x Shaft Locking Buckle
1 x Pull ring screw set
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 0.5-2cm differences due to manual measurement.
Payment
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
Delivery details
We only
ship to confirmed ebay Order addresses.
Please comfirm that your Order address is in line with your shipping address.
Please kindly note that
the c
ombined shipping
is not provided
because the shipping fee is calculated by weight. Also, the each additional item means
exactly
the the same color and size.
It takes about
7
-15 working days to US; about 10-30 working days to other countries.
Transit time may be a little delayed because of the
bad
weather and customs
inspection
. If you
do
not receive your
item
within 30 working days since payment finished, please contact us immediately for further assistance.
Contact us
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions,
p
lease feel free to contact us via "Ask seller a question" . We will reply your email within 24
working hours.