3 Channel Injection Pump Laboratory Microinjection Pump Syringe Booster

Description

3 Channel Injection Pump Laboratory Microinjection Pump Syringe Booster
Specification:
Clampable syringe: 1ml ~ 100ml (diameter <38mm)
Speed range: continuously adjustable in different speed units, millimeters per second (0.01mm/s~0.21mm/s), millimeters per minute (0.01mm/m~12.50mm/m), millimeters per hour (0.01mm/h~ 99.99mm/h)
Time setting: 1 second to 17 hours;
Working mode: manual control, timed work, communication control
Equipment working power: 12V2A
Adapter power supply: 100 ~ 240V / 50Hz
Slider stroke: 140mm
Single circle lead: 1mm
Size: 290mm*130mm*130mm
Weight: 1.5kg
Feature:
1. In addition to the MM unit, the controller also contains the sizes of 1, 2, 5, 10, 20, 30, 50 ml syringes, and automatically switches to ML ml after selection
2. 8mm diameter stainless steel round guide rail is adopted,Extended bearing with flangeThe screw rod adopts T8 lead, 1mm screw, copper screw nut.
3. Clamping adopts pressing block, M4 hand nut fastening
4. The motor is the 42 step motor,Large torque motor is adoptedThe single lap is set to 400 steps.
5. Controller, 1602 liquid crystal display, 4 buttons can set speed, work time, work mode, and the other 4 buttons for controlling the machines, respectively, fixed speed movement and high-speed movement. The set parameter saves the power storage. Quick press add button. BoardReserved TTL level RS-232 interfaceThe control button also has an external interface that can be used for interfacingSwitch off external switch and foot switchEtc.. You can connect external controllers such as computers and PLC.
Note:
Because of the different types of syringes installed, the design only takes into account the displacement and speed settings. In use, you need to use a ruler to measure the distance of the syringe, then calculate the speed of propulsion and get the corresponding velocity.
About the position of the motor. According to the requirements of some users before, the shopkeeper designed the motor at the other end of the injector.
Many customers have asked about the thrust of the problem, where the treasurer tested with a soil approach, you can pull 5 kilograms of weight, so you can thrust at about 50N
Packing Include:
1 x Injection pump
1 x Controller
1 x Power Adapter
Powered by SoldEazy
On Jan-02-20 at 23:15:49 PST, seller added the following information: